2026-03-09T09:10:29Z
https://kumadai.repo.nii.ac.jp/oai
oai:kumadai.repo.nii.ac.jp:00023205
2023-09-26T04:13:14Z
426:428
Lapping of Mn-Zn Ferrite : 1st Report, Effect of Fixed and Loose Abrasive Grains on Removal Rate and Surface Roughness
Mn-Znケイ フェライト ノ ラッピング カコウ ニ カンスル ケンキュウ ダイ1ポウ サクジョリツ オヨビ カコウメン セイジョウ ニ オヨボス コテイ オヨビ ユウリ トリュウ ノ エイキョウ
Mn-Zn系フェライトのラッピング加工に関する研究 : 第1報,削除率および加工面性状に及ぼす固定および遊離砥粒の影響
峠, 睦
147077
トウゲ, ムツミ
Touge, Mutsumi
大渕, 慶史
147073
オオブチ, ヨシフミ
Ohbuchi, Yoshifumi
松尾, 哲夫
168640
マツオ, テツオ
Matsuo, Tetsuo
上田, 昇
168199
ウエダ, ノボル
Ueda, Noboru
前田, 成夫
101704
マエダ, ナルオ
Maeda, Naruo
峠, 睦
101700
大渕, 慶史
101701
松尾, 哲夫
101702
上田, 昇
101703
前田, 成夫
101704
マエダ, ナルオ
Maeda, Naruo
530
Lapping
Abrasive Grain
Surface Roughness
Mn-Zn Ferrite
Removal Rate
Fixed Grain
Loose Grain
AFM
application/pdf
論文(Article)
This paper describes the effect of the motion of diamond grains on the material removal rate and surface roughness in the lapping of Mn-Zn polycrystalline ferrite using a Sn lapping plate and 0.3μm diamond abrasives. The diamond grains can be classified into fixed and loose grains. The grains fixed to a lapping plate were confirmed by SEM and AFM observations. Among many experimental parameters, the change of the pitch of fine grooves on a lapping plate formed by the facing operation has a significant effect on the removal rate. This agrees well with the calculated number of loose grains under various pitches of groove. The average removal rate with fixed and loose grains was found to be about 2.7 times higher than that with only fixed grains. These results indicate that during lapping, the material is mainly removed by loose grains. It is evident from AFM images that the lapped surface with material removed by fixed grains differs very much from that with material removed simultaneously by fixed and loose grains.
http://ci.nii.ac.jp/naid/110002382051@@@http://www.jsme.or.jp
journal article
社団法人 日本機械学会
1995-07-25
VoR
application/pdf
日本機械学會論文集. C編
587
61
3116
3122
AN00187463
https://kumadai.repo.nii.ac.jp/record/23205/files/110002382051.pdf
http://hdl.handle.net/2298/13678
https://kumadai.repo.nii.ac.jp/records/23205
jpn
03875024
社団法人 日本機械学会