@article{oai:kumadai.repo.nii.ac.jp:00017487,
 author = {Namihira, Takao and 浪平, 隆男 and 勝木, 淳 and 秋山, 秀典 and Samaranayake, W. J. M. and Miyahara, Y. and Namihira, T. and Katsuki, S. and Hackam, R. and Akiyama, H.},
 issue = {6},
 journal = {IEEE Transactions on Dielectrics and Electrical Insulation},
 month = {Dec},
 note = {application/pdf, 論文(Article), The production of ozone was investigated using a dielectric barrier discharge in oxygen, and employing short-duration pulsed power. The dependence of the ozone concentration (parts per million, ppm) and ozone production yield (g(O3)/kWh) on the peak pulsed voltage (17.5 to 57.9 kV) and the pulse repetition rate (25 to 400 pulses/s, pps) were investigated. In the present study, the following parameters were kept constant: a pressure of 1.01×105 Pa, a temperature of 26±4°C a gas flow rate of 3.0 1/min and a gaseous gap length of 11 mm. A concentric coaxial cylindrical reactor was used. A spiral copper wire (1 mm in diameter) was wound on a polyvinylchloride (PVC) cylindrical configuration (26 mm in diameter) and placed centrally in a concentric coaxial electrode system with 4 mm thick PVC dielectric layer adjacent to a copper outer electrode of 58 mm in internal diameter. HV and current pulses were provided by a magnetic pulse compressor power source.},
 pages = {849--854},
 title = {Ozone Production Using Pulsed Dielectric Barrier Discharge in Oxygen},
 volume = {7},
 year = {2000},
 yomi = {ナミヒラ, タカオ}
}