WEKO3
アイテム
Recycle of Metal-Plating on Plastics by Pulse Arc Discharge
http://hdl.handle.net/2298/10322
http://hdl.handle.net/2298/10322c571bb2b-397a-4220-83f9-f732f898df21
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
2007_325_1437-1440.pdf (446.5 kB)
|
|
| Item type | 会議発表論文 / Conference Paper(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2008-12-26 | |||||
| タイトル | ||||||
| タイトル | Recycle of Metal-Plating on Plastics by Pulse Arc Discharge | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| 資源タイプ | ||||||
| 資源タイプ | conference paper | |||||
| 著者 |
長島, 貴志
× 長島, 貴志× Akiyama, Hidenori× 浪平, 隆男× 勝木, 淳 |
|||||
| 別言語の著者 |
長島, 貴志
× 長島, 貴志× 秋山, 秀典× 浪平, 隆男× 勝木, 淳 |
|||||
| 内容記述 | ||||||
| 内容記述 | Metal-plating on plastics has been used in household appliances, cars and others. Metal-plating and plastics have to be separated for recycling. The crush separation system is a high running cost. A melting separation system using an acid or an alkali causes deterioration the performance of plastics. Therefore, a new method separating metal-plating and plastics is expected. A method to separate metal-plating on plastics been developed using pulse arc discharges by pulsed power [1]. A large current flow into a metal thin and then a part of the metal film is vaporized by heating. At the same time, a shock wave occurs and removes metal thin film from the plastics. The plastics and metal removed are recyclable. In this paper, the effects ceramic tubes covered on electrodes, the kind of electrode material, the distance between electrodes and the diameter of electrodes on the removal efficiency are studied. |
|||||
| 書誌情報 |
Digest of Technical Papers-IEEE International Pulsed Power Conference 巻 2007, p. 1437-1440, 発行日 2007-06 |
|||||
| DOI | ||||||
| 関連タイプ | isIdenticalTo | |||||
| 関連識別子 | 10.1109/PPPS.2007.4346153 | |||||
| 権利 | ||||||
| 権利情報 | (c)2007 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. | |||||
| フォーマット | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | application/pdf | |||||
| 形態 | ||||||
| 446540 bytes | ||||||
| 著者版フラグ | ||||||
| 出版タイプ | VoR | |||||
| 日本十進分類法 | ||||||
| 主題Scheme | NDC | |||||
| 主題 | 500 | |||||
| 出版者 | ||||||
| 出版者 | Institute of Electrical and Electronics Engineers | |||||
| 資源タイプ | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | 論文(Article) | |||||
| 資源タイプ・ローカル | ||||||
| 会議発表論文 | ||||||
| 資源タイプ・NII | ||||||
| Conference Paper | ||||||
| 資源タイプ・DCMI | ||||||
| text | ||||||
| 資源タイプ・ローカル表示コード | ||||||
| 05 | ||||||
| コメント | ||||||
| 16th IEEE International Pulsed Power Conference, Albuquerque, New Mexico, June 17-22, 2007 |
||||||
