WEKO3
アイテム
Ozone Production Using Pulsed Dielectric Barrier Discharge in Oxygen
http://hdl.handle.net/2298/3483
http://hdl.handle.net/2298/348300a6506d-9ad5-4559-b622-1c1c335ed483
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
00891999.pdf (521.8 kB)
|
|
| Item type | 学術雑誌論文 / Journal Article(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2007-08-06 | |||||
| タイトル | ||||||
| タイトル | Ozone Production Using Pulsed Dielectric Barrier Discharge in Oxygen | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| 資源タイプ | ||||||
| 資源タイプ | journal article | |||||
| 著者 |
Samaranayake, W. J. M.
× Samaranayake, W. J. M.× Miyahara, Y.× Namihira, T.× Katsuki, S.× Hackam, R.× Akiyama, H. |
|||||
| 別言語の著者 |
浪平, 隆男
× 浪平, 隆男× 勝木, 淳× 秋山, 秀典 |
|||||
| 内容記述 | ||||||
| 内容記述 | The production of ozone was investigated using a dielectric barrier discharge in oxygen, and employing short-duration pulsed power. The dependence of the ozone concentration (parts per million, ppm) and ozone production yield (g(O3)/kWh) on the peak pulsed voltage (17.5 to 57.9 kV) and the pulse repetition rate (25 to 400 pulses/s, pps) were investigated. In the present study, the following parameters were kept constant: a pressure of 1.01×105 Pa, a temperature of 26±4°C a gas flow rate of 3.0 1/min and a gaseous gap length of 11 mm. A concentric coaxial cylindrical reactor was used. A spiral copper wire (1 mm in diameter) was wound on a polyvinylchloride (PVC) cylindrical configuration (26 mm in diameter) and placed centrally in a concentric coaxial electrode system with 4 mm thick PVC dielectric layer adjacent to a copper outer electrode of 58 mm in internal diameter. HV and current pulses were provided by a magnetic pulse compressor power source. | |||||
| 書誌情報 |
IEEE Transactions on Dielectrics and Electrical Insulation 巻 7, 号 6, p. 849-854, 発行年 2000-12 |
|||||
| 書誌レコードID | ||||||
| 収録物識別子タイプ | NCID | |||||
| 収録物識別子 | AA10992839 | |||||
| DOI | ||||||
| 関連タイプ | isIdenticalTo | |||||
| 関連識別子 | 10.1109/94.891999 | |||||
| 権利 | ||||||
| 権利情報 | c2000 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. IEEE, IEEE Transactions on Dielectrics and Electrical Insulation, 7, 6, 2000, 849-854 | |||||
| フォーマット | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | application/pdf | |||||
| 形態 | ||||||
| 521758 bytes | ||||||
| 著者版フラグ | ||||||
| 出版タイプ | VoR | |||||
| 日本十進分類法 | ||||||
| 主題Scheme | NDC | |||||
| 主題 | 500 | |||||
| 出版者 | ||||||
| 出版者 | Institute of Electrical and Electronics Engineers | |||||
| 資源タイプ | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | 論文(Article) | |||||
| 資源タイプ・ローカル | ||||||
| 雑誌掲載論文 | ||||||
| 資源タイプ・NII | ||||||
| Journal Article | ||||||
| 資源タイプ・DCMI | ||||||
| text | ||||||
| 資源タイプ・ローカル表示コード | ||||||
| 01 | ||||||
